The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.
Type
Topic
Year
Displaying 76 - 100 of 223
Smail
LANDFIRE total fuel change tool (ToFu Delta) works through a Microsoft Access database to produce spatial results in Arc Map based on rule sets devised by the user which principally take into account the existing vegetation type (EVT), existing vegetation cover (EVC), existing…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Schelvan
The Fire Characteristics Chart, a supplement to the BehavePlus fire modeling system has been released. This program, a stand-alone version of the chart, provides graphical representation of modeled or observed fire behavior for surface and crown fire. It replaces the limited…
Type: Tool
Source: FRAMES
Rupp
An understanding of the processes that control wildland fuel accumulation, including the roles played by climate change and fire management activities, is crucial for designing wildland management policies. Boreal ALFRESCO simulates the responses of subarctic and boreal…
Type: Tool
Source: FRAMES
Atmospheric circulation patterns influence seasonal temperature and precipitation across large regions of Alaska. This experimental product uses to information to produce a forecast of area burned in Interior Alaska (i.e. South of the Brooks Range and North of the Alaska Range…
Type: Tool
Source: FRAMES
The Interagency Fuel Treatment Decision Support System (IFTDSS) is a web-based application designed to make fuel treatment planning and analysis more efficient and effective. IFTDSS provides access to data and models through one simple user interface. It is available to all…
Type: Tool
Source: FRAMES
FERA and the LANDFIRE team collaborated together to develop and map a set of FCCS fuelbeds to represent complete coverage of current vegetation types designated in LANDFIRE. Coverage of this GIS layer is at a 30-m resolution across the continental United States. The fuelbed map…
Type: Tool
Source: FRAMES
Forthofer, Butler
WindWizard is no longer supported by the Missoula Fire Sciences Lab as the underlying software is not readily available. Much of the computational fluid dynamics (CFD) modeling within the WindWizard framework was added to the WindNinja software.
WindWizard is a…
Type: Tool
Source: FRAMES
The RAWS USA Climate Archive website provides detailed Remote Automated Weather Station (RAWS) observations for all stations in the United States, along with weather station information, maps, graphs,and photos. Weather observations are archived, with past and current hourly…
Type: Tool
Source: FRAMES
Toney, Bramel, Anderson
LANDFIRE Data Access Tool for ArcGIS downloads LANDFIRE data directly from ArcMap.
Type: Tool
Source: FRAMES
Hamilton, Jones, Hann
Fire Behavior Assessment Tool produces fire behavior characteristics that could occur under specified conditions.
Type: Tool
Source: FRAMES
Hutter, Jones, Hann, Levesque
Area Change Tool edits ArcGrids to characterize changes based on potential treatment.
Type: Tool
Source: FRAMES
Hamilton, Hann
Provides an efficient system for analyzing and storing field-based FRCC data. The tool also produces automated reports with data tables and FRCC graphics.
Type: Tool
Source: FRAMES
Hutter, Jones, Zeiler
The FRCC Mapping Tool quantifies the departure of vegetation conditions from a set of reference conditions representing the historical range of variation. The tool, which operates from an ArcGIS platform, derives several metrics of departure by comparing the composition of…
Type: Tool
Source: FRAMES
ANNOTATION: FRCS is a spreadsheet application useful for estimating the cost of forest operations undertaken to reduce forest fuel loads by cutting and removing trees for solid wood products or chips. It can also be used to estimate the cost of collecting and chipping forest…
Type: Tool
Source: FRAMES
ANNOTATION: This is an Excel spreadsheet that converts wood moisture contents from either dry basis to wet basis or wet basis to dry basis. The moisture content of biomass affects the gross weight of the material that is being handled. Green material will have a higher density…
Year: 2008
Type: Tool
Source: FRAMES
Ashton, McDonell, Barnes, Langholtz
ANNOTATION: This Guide is designed for use by Resource Conservation & Development and Extension professionals throughout the U.S. It also contains handouts and other resources to assist in educating respective audience. The Woody Biomass Desk Guide and Toolkit provides an…
Type: Tool
Source: FRAMES
ANNOTATION: FoRTS is a spreadsheet based calculator designed to help compare alternative methods of moving biomass from the forest to a wood-using facility. It will estimate loading and hauling costs for different combinations of equipment, evaluate the best mix (numbers and…
Type: Tool
Source: FRAMES
Fried, Barbour, Fight
ANNOTATION: FIA BioSum is a concept-based methodology that generates cost estimates, identifies opportunities and evaluates the effectiveness of fuel treatments in region-wide forested landscapes. The BioSum modeling framework incorporates a transportation cost model, a…
Type: Tool
Source: FRAMES
The Wildland Fire Decision Support System (WFDSS) assists fire managers and analysts in making strategic and tactical decisions for fire incidents. It has replaced the WFSA (Wildland Fire Situation Analysis), Wildland Fire Implementation Plan (WFIP), and Long-Term Implementation…
Type: Tool
Source: FRAMES
CFIS incorporates several models designed to simulate crown fire behavior. The main outputs of CFIS are: (1) the likelihood of crown fire initiation or occurrence; (2) the type of crown fire (active vs. passive) and its rate of spread; and (3) the minimum spotting distance…
Year: 2006
Type: Tool
Source: FRAMES
You can use the MDI Test Data Analysis Spreadsheet to process post-fire mini-disk infiltrometer measurements. The spreadsheet is designed to analyze data from the MDI test procedure and post-fire sampling method described in New Procedure for Sampling Infiltration to Assess Post…
Type: Tool
Source: FRAMES
Current post-fire assessment procedures require identification and valuation of values-at-risk (VAR), such as human life and safety, cultural and ecological resources, land use, and existing infrastructure, from potential secondary effects (e.g., increased runoff, erosion,…
Type: Tool
Source: FRAMES
FireFamily Plus is a software system for summarizing and analyzing historical daily fire weather observations and computing fire danger indices based on the National Fire Danger Rating System (NFDRS) or the Canadian Fire Danger Rating System (CAN). Fire occurrence data can also…
Type: Tool
Source: FRAMES
Ager
Vegetation and fuel management planning is a complex problem that requires advanced vegetation and fire behavior modeling and intensive spatial data analyses. Both the benefits and potential impacts of proposed treatments must be clearly demonstrated in the context of land…
Type: Tool
Source: FRAMES