The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.
Type
Topic
Year
Displaying 1 - 25 of 98
The growing complexity and duration of wildland fires continues to challenge the capability and expertise of U.S. Forest Service agency administrators, fire managers and the wildfire response system as a whole. As wildfires become more complex and the risk to firefighters, the…
Type: Tool
Source: FRAMES
Finney
FlamMap is a fire analysis desktop application that runs in a 64-bit Windows Operating System environment. It can simulate potential fire behavior characteristics (spread rate, flame length, fireline intensity, etc.), fire growth and spread and conditional burn probabilities…
Year: 2022
Type: Tool
Source: FRAMES
The Fire Environment Mapping System (FEMS) is a new wildland fire IT application which will support wildland fire preparedness and decision-making with better access to fire environment datasets and online analysis tools. FEMS will support a core principle of the Cohesive…
Type: Tool
Source: FRAMES
WildfireSAFE was designed to increase firefighter & fire manager situation awareness and enhance risk mitigation planning in wildland fire operations. It supports the greater interagency fire community in the planning, response, and recovery phases of wildfire management. By…
Type: Tool
Source: FRAMES
Friggens
FireCLIME (Fire-Climate Landscape Interactions in Montane Ecosystems) Vulnerability Assessment v3.1 is a macro-enabled Excel file (xlsm). A user guide is also available below.
Year: 2019
Type: Tool
Source: FRAMES
Perrakis
This tool allows users to look at fire behavior characteristics (rate of spread and fireline intensity) for multiple fuel types on the same graph. Other factors, including Initial Spread Index, Buildup Index, and Foliar Moisture Content can be adjusted as well. This chart was…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Bevins, Tirmenstein
The BehavePlus fire modeling system is a PC-based program that is a collection of models that describe fire behavior, fire effects, and the fire environment. It is a flexible system that produces tables, graphs, and simple diagrams and can be used for a multitude of fire…
Type: Tool
Source: FRAMES
Tate
e-ISuite is a software program used to manage incident resources. The e-ISuite system is a web browser (e.g. Internet Explorer) enabled application for use at the Incident Command Post (ICP) and in agency offices to manage emergency incidents and planned events. No software…
Type: Tool
Source: FRAMES
Fire Dynamics Simulator (FDS) is a large-eddy simulation (LES) code for low-speed flows, with an emphasis on smoke and heat transport from fires. Smokeview (SMV) is a visualization program used to display the output of FDS and CFAST simulations.
Year: 2015
Type: Tool
Source: FRAMES
Scott
This tool allows users to look at fire behavior characteristics (such as rate of spread, fireline intensity, flame length, heat per unit area, and wind adjustment factor) for multiple fuel types on the same graph. Other factors such as moisture content, understory vegetation…
Type: Tool
Source: FRAMES
Ottmar, Prichard, Swedin, Eagle
Consume is a decision-making tool designed to assist resource managers in planning for wildland fire events (e.g., prescribed fires and wildfires). Consume predicts fuel consumption, pollutant emissions, and heat release based on fuel loadings, fuel moisture, and other…
Year: 2014
Type: Tool
Source: FRAMES
Prichard, Ottmar
Fuel and Fire Tools (FFT) is a software application that integrates the Fuel Characteristics Classification System (version 3.0), Consume (version 4.2), FEPS (version 2.0), Pile Calculator, and Digital Photo Series into a single user interface. All of the tools were developed…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Schelvan
This stand-alone program is part of the BehavePlus fire modeling system, replacing the fire characteristics chart output option in the SURFACE module of BehavePlus. The program allows the user to graph observed or modeled fire behavior characteristics for surface and crown fire.
Type: Tool
Source: FRAMES
Forthofer, Butler, Wagenbrenner
Wind is one of the most important environmental factors affecting wildland fire behavior. Complex terrain in fire-prone landscapes induces local changes in the near-surface wind that are not predicted well by either operational weather models or expert judgment. WindNinja was…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Gray
ICBS is the automated cache inventory system designed to assist in inventory control and cost accounting for all items stocked in the National Fire Equipment System (NFES). The application is intended for use by the USDA, Forest Service and USDI, Bureau of Land Management…
Type: Tool
Source: FRAMES
The I-Suite application consists of the Incident Resource Status System (IRSS), Incident Cost Accounting and Reporting, System (ICARS), Incident Time System (ITS) and the Incident Action Plan (IAP). Together, these applications are called the 'I-Suite' (IRSS, ICARS, ITS, IAP = I…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Bevins, Schelvan, Tirmenstein, Noonan, Jolly, Bartlette, Scott, Stratton, Seli, Kelley, Carlton, Custer
The BehavePlus fire modeling system is a PC-based program that is a collection of models that describe fire behavior, fire effects, and the fire environment. It is a flexible system that produces tables, graphs, and simple diagrams and can be used for a multitude of fire…
Type: Tool
Source: FRAMES
Jimenez
This self-paced math course refreshers firefighters' knowledge of basic math concepts and tools necessary for making math calculations in the field. Topics include calculating tank volumes and flow rates, determining pump pressure and friction loss, understanding maps and…
Type: Tool
Source: FRAMES
Canopy fuel stratum characteristics determine to a large extent the behavior of crown fires. By linking an extensive forest stand database with foliage dry weight allometric equations, we developed regression equations to estimate the following canopy fuel stratum…
Year: 2013
Type: Tool
Source: FRAMES
Mell
The Wildland-Urban Interface Fire Dynamics Simulator (WFDS) is an extension of NIST's structural Fire Dynamics Simulator (FDS) to fuels that include vegetation. WFDS uses computational fluid dynamics methods to solve the governing equations for buoyant flow, heat transfer,…
Type: Tool
Source: FRAMES