The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.
Type
Topic
Year
Displaying 1 - 25 of 30
Schier, Zasada
[no description entered]
Year: 1973
Type: Document
Source: TTRS
Wright
[no description entered]
Year: 1970
Type: Document
Source: TTRS
Lawson
[no description entered]
Year: 1973
Type: Document
Source: TTRS
Kanury, Blackshear
[no description entered]
Year: 1970
Type: Document
Source: TTRS
Felske, Tien
[no description entered]
Year: 1973
Type: Document
Source: TTRS
Brown, Davis
[no description entered]
Year: 1973
Type: Document
Source: TTRS
Lee, Hellman
[no description entered]
Year: 1970
Type: Document
Source: TTRS
Furman, Helfman
FIRDAT is a FORTRAN IV program to compute the daily components and indexes of the National Fire-Danger Rating System. FIRDAT will also compute and print the absolute, relative and cumulative frequencies of occurrence, and print a cumulative frequency distribution for each of the…
Year: 1973
Type: Document
Source: TTRS
Fahnestock
[no description entered]
Year: 1970
Type: Document
Source: TTRS
Travis, Elsner, Kourtz
From the Introduction: 'The description of this package is divided into two sections namely, the fuel type boundary section and the terrain contouring section. Each section is divided further into four subsections describing: (a) the procedure for setting up and use of the…
Year: 1973
Type: Document
Source: TTRS
Simard
From the conclusion:'As previously mentioned, the results of this study cannot be applied in the field. A great deal of additional work will be needed before application is possible. This study does show, however, that a systems dynamics approach is well suited to analyzing the…
Year: 1973
Type: Document
Source: TTRS
Jin
From the summary:'Experimental study on the visibility through fire smoke was carried out. The relation among the brightness of sign, visual distance, and the extinction coefficient of smoke at the instant of obscuration threshold was obtained by using the smoke chamber. The…
Year: 1970
Type: Document
Source: TTRS
Dahlgreen
[no description entered]
Year: 1973
Type: Document
Source: TTRS
Fosberg
The heat transfer rate to forest fuels ahead of a flaming fire front is highly variable over the interval of time required to preheat the fuels. An analytical function was derived which permitted inclusion of this varying transfer rate in the calculation of temperature rise for…
Year: 1973
Type: Document
Source: TTRS
Byram, Nelson
The authors present scaling relationships for modeling pulsating fires. Data gathered from various sizes of pulsating fires compared favorably with the predicted relationships between fire diameter and pulsation frequency.
Year: 1970
Type: Document
Source: TTRS
Berlad
A theoretical model is constructed that represents quasi-steady fire spread in solid fuel arrays. The continuum representation employs descriptors that follow naturally from existing flame theory and that correspond to real observables. A set of 'debris conservation equations'…
Year: 1970
Type: Document
Source: TTRS
Cunningham, Martell
This paper discusses the occurrence of man-caused forest fires during the summer fire season in a section of northwestern Ontario. Fire occurrence is viewed as being a chance process and a stochastic model is developed to describe it. The results of this study indicate that a…
Year: 1973
Type: Document
Source: TTRS
Byram, Martin
The fire whirlwind, an erratic and violent phenomenon associated with the behavior of intense fires, may generate velocities comparable to those reached in tornadoes. All the conditions essential to the formation of fire whirlwinds can be readily produced in the laboratory on a…
Year: 1970
Type: Document
Source: TTRS
Frandsen
A method is presented for the evaluation of the heating efficiency required for ignition as a spreading fire closes with fuel. An array of thermocouples was implanted in the fuel ahead of the fire to obtain the heat absorbed by the fuel prior to ignition. The fraction absorbed…
Year: 1973
Type: Document
Source: FRAMES, TTRS
Frandsen
An inconsistency arises in Rothermel's fire spread model when there are two or more categories. If a fuel load is split into identical classes in two separate categories, the reaction intensity is less than if the load is contained in a single class in one category. The author…
Year: 1973
Type: Document
Source: FRAMES
Frandsen
A computer program assembled for the Hewlett-Packard 9800/Model 20 is presented for calculating the rate of fire spread according to Rothermel's fire spread model.
Year: 1973
Type: Document
Source: FRAMES
Byram, Nelson
The authors present scaling relationships for modeling pulsating fires. Data gathered from various sizes of pulsating fires compared favorably with the predicted relationships between fire diameter and pulsation frequency.
[This publication is referenced in the "Synthesis of…
Year: 1970
Type: Document
Source: FRAMES
Stage
Describes a set of computer programs for developing prognoses of the development of existing stand under alternative regimes of management. Calibration techniques, modeling procedures, and a procedure for including stochastic variation are described. Implementation of the system…
Year: 1973
Type: Document
Source: FRAMES
Frandsen
A computer program assembled for the Hewlett-Packard 9800/Model 20 is presented for calculating the rate of fire spread according to Rothermel's fire spread model.
Year: 1973
Type: Document
Source: TTRS
Frandsen
An inconsistency arises in Rothermel's fire spread model when there are two or more categories. If a fuel load is split into identical classes in two separate categories, the reaction intensity is less than if the load is contained in a single class in one category. The author…
Year: 1973
Type: Document
Source: TTRS