The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.
Type
Topic
Year
Displaying 151 - 175 of 251
Deeming, Burgan, Cohen
The 1978 National Fire-Danger Rating System (NFDRS) updates the danger rating system developed in the early 1970's and published by Deeming and others in 1972. Numerous changes have been made to correct deficiencies and to incorporate new technology. The most significant of the…
Year: 1977
Type: Document
Source: FRAMES
Countryman
Wildland fire involves both chemical and physical processes. In the burning of wildland fuel burns, their stored chemical energy is converted to thermal energy or heat through a series of complex chemical reactions. But for the combustion process to be started, heat must be…
Year: 1977
Type: Document
Source: FRAMES
Countryman
Heat transfer is of paramount importance in wildland fire behavior and control. For a fire to start, heat must be transferred from a firebrand to the fuel. If the fire is to continue to burn and spread, heat must be transferred to the unburned fuel around the fire. And…
Year: 1977
Type: Document
Source: FRAMES
Countryman
Three ingredients are essential for a wildland fire to start and to burn. First, there must be burnable fuel available. Then enough heat must be applied to the fuel to raise its temperature to the ignition point. And finally, there must be enough air to supply oxygen needed to…
Year: 1977
Type: Document
Source: FRAMES
Countryman
Before a wildland fire can start, heat must be transferred from a firebrand to the fuel. Then heat must be transferred from the fuel surface to deeper layers if the fire is to continue to burn. Finally, heat must be transferred to surrounding unburned fuel if the fire is to…
Year: 1976
Type: Document
Source: FRAMES
Countryman
Wildland fire is dependent on heat transfer. For a fire to start, heat must be transferred from a firebrand to the fuel. If the fire is to burn and grow, heat transfer to the unburned fuel around the fire must continue. The way a fire burns and behaves is closely related to the…
Year: 1976
Type: Document
Source: FRAMES
Countryman
Heat, or thermal energy, is one of the three ingredients essential to fire-the other two are oxygen and fuel. Enough oxygen for fire is almost always available in wildlands, and fuel is usually plentiful. But the mere presence of a heat source does not necessarily result in a…
Year: 1976
Type: Document
Source: FRAMES
Albini
This document comprises a reference manual for computer programs (FIREMODS) pertaining to wildfire behavior and its effects, maintained by the Fire Fundamental research work unit, Northern Forest Fire Laboratory, Missoula, Montana. The subroutines embody mathematical models that…
Year: 1976
Type: Document
Source: FRAMES
Anderson, Hoover, Reinhart
From the background of more than 100 years' collective experience in watershed research and from comprehensive review of the literature of forest hydrology, the authors summarize what is known about the forest's influence on the water resource, particularly the effects of…
Year: 1976
Type: Document
Source: FRAMES
Van Wagner
[Excerpted from text] As interest in the prediction of actual fire spread rate increases, some way of accounting for the effect of slope desirable. The literature contains a few references on this question, and five of these are compared here.
[This publication is referenced in…
Year: 1977
Type: Document
Source: FRAMES
Moussa, Trischka, Eskinazi
In the mixing of a jet with a cross-stream, it is found that in the near field, defined as the region of the flow from the jet exit to a distance of a few diameters downstream of this exit, a considerable amount of dynamical adjustment takes place. This near-field region…
Year: 1977
Type: Document
Source: FRAMES
Martin, Pendleton, Burgess
Burning rates of Douglas fir wood were measured using crosspiled sticks 1/4, 1/2, 3/4, and 1 in. (0.64, 1.27, 1.90, and 2.54 cm) in cross-sectional dimensions. Burning was 1.4 to 4.2 times as fast with the whirlwind as without.
[This publication is referenced in the "Synthesis…
Year: 1976
Type: Document
Source: FRAMES, TTRS
Sandberg, Pickford
Our paper points out certain problems in current predictive methods on which most smoke management programs are based. These problems complicate research efforts to improve predictability of air quality impacts of forest burning. In addition, we offer a hypothesis, based on…
Year: 1976
Type: Document
Source: FRAMES, TTRS
Ward, McMahon, Johansen
Recent estimates of particulate production from forest fires in the United States have ranged from 500,000 to 54,000,000 tons annually. This has been due partly to disparities in estimates of fuel that is consumed during the combustion process, but more to the choice of emission…
Year: 1976
Type: Document
Source: FRAMES
Mallory, Van Meter
Chemicals from glowing fires in highly decayed conifer logs may be useful for detection of small fires by spectroscopic methods. Two major chemical constituents were tentatively identified as methanol and furfural (2-furaldehyde). Additional materials tentatively identified were…
Year: 1976
Type: Document
Source: FRAMES
Tangren
The author discusses the inadequacies and limitations of the term 'fire intensity' as it is used to describe the severity of forest fires and suggests that the term 'fire front power' is more appropriate.
Year: 1976
Type: Document
Source: FRAMES
Frost, Haines
Describes how to build a housing for the balance used to weigh fuel moisture sticks. The housing is easy to build, low-cost, and can be mounted on the supports of the standard cotton region shelter.
Year: 1976
Type: Document
Source: FRAMES
Crosby
A set of value concepts and methods for appraising both values-at-risk and change in value resulting from wildfire are presented. Emphasis is placed on the effects of forest fires in terms of their affects on human and organization goal achievement. Fire effects that help…
Year: 1977
Type: Document
Source: FRAMES, TTRS
Buskirk
Description not entered.
Year: 1976
Type: Document
Source: FRAMES
Wolff
Description not entered.
Year: 1977
Type: Document
Source: FRAMES
Baughman, Schmid
The characteristics of 23 cumulus congestus clouds were investigated in interior Alaska during the summer of 1973. Results show Alaskan lightning storms are generally smaller, more isolated, and produce less lightning than western Montana storms. Nine storms produced 123…
Year: 1977
Type: Document
Source: TTRS
Fritts
[Description from Elsevier website] Tree Rings and Climate deals with the principles of dendrochronology, with emphasis on tree-ring studies involving climate-related problems. This book looks at the spatial and temporal variations in tree-ring growth and how they can be used to…
Year: 1976
Type: Document
Source: FRAMES
Adams
The planar intersect technique involves counting or measuring diameters of woody pieces intersected by a vertical plane. It is based on the line intersect technique, which compares length of a given line and the amount of that line crossed by residue pieces. The sum of circular…
Year: 1977
Type: Document
Source: FRAMES
Burgan, Cohen, Deeming
This publication contains instructions for manually calculating the indexes and components of the 1978 National Fire-Danger Rating System (NFDRS). The procedures are explained with worked examples. Working sets of nomo grams for the 20 NFDRS fuel models are not included. However…
Year: 1977
Type: Document
Source: FRAMES
George, Blakely, Johnson
Forest fire retardant research was divided into five different study areas: (1) retardant effectiveness; (2) retardant physical properties; (3) retardant delivery systems; (4) retardant-caused corrosion; and 5) retardant environmental impact. Past research is reviewed for each…
Year: 1976
Type: Document
Source: FRAMES, TTRS