The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.
Type
Topic
Year
Displaying 1 - 25 of 97
Finney
FlamMap is a fire analysis desktop application that runs in a 64-bit Windows Operating System environment. It can simulate potential fire behavior characteristics (spread rate, flame length, fireline intensity, etc.), fire growth and spread and conditional burn probabilities…
Year: 2022
Type: Tool
Source: FRAMES
CMAQ (see-mak), the Community Multiscale Air Quality Modeling System, is an active open-source development project of the US Environmental Protection Agencythat consists of a suite of programs for conducting air quality model simulations. CMAQ combines current knowledge in…
Type: Tool
Source: FRAMES
Fuels Data is designed for wildland management practitioners tasked with collecting surface fuels measurements in the field It automatically performs calculations and table lookups. Photos and data are linked together, which eliminates the need to diligently sequence reference…
Year: 2023
Type: Tool
Source: FRAMES
The Smoke Emissions Reference Application (SERA) database is a compilation of field and laboratory emission factors of wildland fire across the United States and Canada. The SERA database facilitates the analysis and summary of existing emission factors for emissions inventories…
Type: Tool
Source: FRAMES
WildfireSAFE was designed to increase firefighter & fire manager situation awareness and enhance risk mitigation planning in wildland fire operations. It supports the greater interagency fire community in the planning, response, and recovery phases of wildfire management. By…
Type: Tool
Source: FRAMES
Friggens
FireCLIME (Fire-Climate Landscape Interactions in Montane Ecosystems) Vulnerability Assessment v3.1 is a macro-enabled Excel file (xlsm). A user guide is also available below.
Year: 2019
Type: Tool
Source: FRAMES
Perrakis
This tool allows users to look at fire behavior characteristics (rate of spread and fireline intensity) for multiple fuel types on the same graph. Other factors, including Initial Spread Index, Buildup Index, and Foliar Moisture Content can be adjusted as well. This chart was…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Bevins, Tirmenstein
The BehavePlus fire modeling system is a PC-based program that is a collection of models that describe fire behavior, fire effects, and the fire environment. It is a flexible system that produces tables, graphs, and simple diagrams and can be used for a multitude of fire…
Type: Tool
Source: FRAMES
Howe, St. Clair, Bachelet, Stevenson-Molnar
The Seedlot Selection Tool (SST) is a GIS mapping program designed to help forest managers match seedlots with planting sites based on climatic information. The climates of the planting sites can be chosen to represent current climates, or future climates based on selected…
Year: 2019
Type: Tool
Source: FRAMES
Freeman, Frescino
Creates sophisticated models of training data and validates the models with an independent test set, cross validation, or Out Of Bag (OOB) predictions on the training data. Create graphs and tables of the model validation results. Applies these models to GIS .img files of…
Year: 2023
Type: Tool
Source: FRAMES
Scott
This tool allows users to look at fire behavior characteristics (such as rate of spread, fireline intensity, flame length, heat per unit area, and wind adjustment factor) for multiple fuel types on the same graph. Other factors such as moisture content, understory vegetation…
Type: Tool
Source: FRAMES
The Fire Emission Production Simulator (FEPS) manages data concerning consumption, emissions and heat release characteristics of prescribed burns and wildland fires. FEPS can be used for most forest, shrub and grassland types in North America and the world. The program allows…
Type: Tool
Source: FRAMES
Ottmar, Prichard, Swedin, Eagle
Consume is a decision-making tool designed to assist resource managers in planning for wildland fire events (e.g., prescribed fires and wildfires). Consume predicts fuel consumption, pollutant emissions, and heat release based on fuel loadings, fuel moisture, and other…
Year: 2014
Type: Tool
Source: FRAMES
Prichard, Ottmar
Fuel and Fire Tools (FFT) is a software application that integrates the Fuel Characteristics Classification System (version 3.0), Consume (version 4.2), FEPS (version 2.0), Pile Calculator, and Digital Photo Series into a single user interface. All of the tools were developed…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Schelvan
This stand-alone program is part of the BehavePlus fire modeling system, replacing the fire characteristics chart output option in the SURFACE module of BehavePlus. The program allows the user to graph observed or modeled fire behavior characteristics for surface and crown fire.
Type: Tool
Source: FRAMES
Forthofer, Butler, Wagenbrenner
Wind is one of the most important environmental factors affecting wildland fire behavior. Complex terrain in fire-prone landscapes induces local changes in the near-surface wind that are not predicted well by either operational weather models or expert judgment. WindNinja was…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Bramel, Dousset, Finlayson, Hamilton
The Wildland Fire Assessment Tool (WFAT) is a custom ArcMap toolbar that provides an interface between ArcGIS desktop software, FlamMap3 algorithms (Finney 2006) and First Order Fire Effects Model (FOFEM) algorithms (Reinhardt 2003) to produce predicted fire behavior and fire…
Type: Tool
Source: FRAMES
Keane, Lutes, Reinhardt, Gangi
First Order Fire Effects Model (FOFEM) is a computer program that was developed to meet needs of resource managers, planners, and analysts in predicting and planning for fire effects. Quantitative predictions of fire effects are needed for planning prescribed fires that best…
Type: Tool
Source: FRAMES
Wright
Land managers needed a tool to accurately and efficiently estimated the biomass of hand-piled fuels as pile burning becomes a more widespread and common method for treating high fire hazard areas with heavy surface fuels. Past pile characterization research dealt only with large…
Type: Tool
Source: FRAMES
Andrews, Heinsch, Bevins, Schelvan, Tirmenstein, Noonan, Jolly, Bartlette, Scott, Stratton, Seli, Kelley, Carlton, Custer
The BehavePlus fire modeling system is a PC-based program that is a collection of models that describe fire behavior, fire effects, and the fire environment. It is a flexible system that produces tables, graphs, and simple diagrams and can be used for a multitude of fire…
Type: Tool
Source: FRAMES
A mobile application for prescribed fire smoke management with features including guidelines, a fuel calculator, fact sheets, Smokepedia glossary, and other helpful resources. Developed by North Carolina State University for the Coalition of Prescribed Fire Councils and the…
Type: Tool
Source: FRAMES
French, McKenzie
The Wildland Fire Emissions Information System (WFEIS) is a web-based tool that provides users a simple user interface for computing wildland fire emissions across North America at landscape to regional scales (1-km spatial resolution). WFEIS provides access to fire perimeter…
Type: Tool
Source: FRAMES