Skip to main content

The Alaska Reference Database originated as the standalone Alaska Fire Effects Reference Database, a ProCite reference database maintained by former BLM-Alaska Fire Service Fire Ecologist Randi Jandt. It was expanded under a Joint Fire Science Program grant for the FIREHouse project (The Northwest and Alaska Fire Research Clearinghouse). It is now maintained by the Alaska Fire Science Consortium and FRAMES, and is hosted through the FRAMES Resource Catalog. The database provides a listing of fire research publications relevant to Alaska and a venue for sharing unpublished agency reports and works in progress that are not normally found in the published literature.

Displaying 1 - 25 of 202

The Fire Environment Mapping System (FEMS) is a new wildland fire IT application which will support wildland fire preparedness and decision-making with better access to fire environment datasets and online analysis tools. FEMS will support a core principle of the Cohesive…
Type: Tool
Source: FRAMES

Smoke from wildfires in the United States is adversely affecting air quality and potentially putting more people at health risk from smoke exposure. The United States Environmental Protection Agency (EPA), the USDA Forest Service, and other federal, state and community agencies…
Type: Tool
Source: FRAMES

Fuels Data is designed for wildland management practitioners tasked with collecting surface fuels measurements in the field It automatically performs calculations and table lookups. Photos and data are linked together, which eliminates the need to diligently sequence reference…
Year: 2023
Type: Tool
Source: FRAMES

Wildland Fire Histomap - Learning from the past, preparing for the future. From the USFS Innovation and Organizational Learning Team, this histomap provides overviews and datasets of wildland fire accidents and incidents.
Year: 2023
Type: Tool
Source: FRAMES

The Department of Interior (DOI) Office of Wildland Fire and USGS created the Wildfire Hazard and Risk Assessment Clearinghouse to meet the Monitoring, Maintenance, and Treatment Plan requirements under the Bipartisan Infrastructure Law (BIL). It provides an interactive…
Year: 2023
Type: Tool
Source: FRAMES

CMAQ (see-mak), the Community Multiscale Air Quality Modeling System, is an active open-source development project of the US Environmental Protection Agencythat consists of a suite of programs for conducting air quality model simulations. CMAQ combines current knowledge in…
Type: Tool
Source: FRAMES

The growing complexity and duration of wildland fires continues to challenge the capability and expertise of U.S. Forest Service agency administrators, fire managers and the wildfire response system as a whole. As wildfires become more complex and the risk to firefighters, the…
Type: Tool
Source: FRAMES

Finney
FlamMap is a fire analysis desktop application that runs in a 64-bit Windows Operating System environment. It can simulate potential fire behavior characteristics (spread rate, flame length, fireline intensity, etc.), fire growth and spread and conditional burn probabilities…
Year: 2022
Type: Tool
Source: FRAMES

Improving fire outcomes for communities requires local organizing and action. The Fire Adapted Communities (FAC) Pathways Tool helps communities identify a set of strategies which are tailored to their strengths and needs, and based on practices which have been successful in…
Year: 2022
Type: Tool
Source: FRAMES

Provides access to the data used in the GWIS applications. Data from the Current Situation Viewer are provided from the WMS (Web Map Service​).
Year: 2021
Type: Tool
Source: FRAMES

Boschetti, Roy
The datasets distributed from the new "County Profiles" portal are designed to be used for Intergovernmental Panel on Climate Change compliant fire activity reporting and emission inventories. From the new portal, users can access tables, maps and interactive charts that…
Year: 2021
Type: Tool
Source: FRAMES

A tool that is part of the Global Wildfire Information System (GWIS) providing fire danger forecast up to 10 days in advance, 1-day lightning forecast and near-real time information on active fires, burnt areas and emissions worldwide.
Year: 2020
Type: Tool
Source: FRAMES

Healey, Yang, Cohen
he Landscape Change Monitoring System (LCMS) is a remote sensing-based system for mapping and monitoring landscape change across the United States. LCMS produces annual maps depicting change (vegetation loss and vegetation gain), land cover, and land use from 1985 to present…
Year: 2020
Type: Tool
Source: FRAMES

The COVID-19 Incident Risk Assessment Tool is intended to help fire managers assess COVID-19 risk in fire camp at the incident level. The tool is intended to promote situational awareness, identify mitigations within the scope of control, and help line officers, incident…
Year: 2020
Type: Tool
Source: FRAMES

WildfireSAFE was designed to increase firefighter & fire manager situation awareness and enhance risk mitigation planning in wildland fire operations. It supports the greater interagency fire community in the planning, response, and recovery phases of wildfire management. By…
Type: Tool
Source: FRAMES

Friggens
FireCLIME (Fire-Climate Landscape Interactions in Montane Ecosystems) Vulnerability Assessment v3.1 is a macro-enabled Excel file (xlsm). A user guide is also available below.
Year: 2019
Type: Tool
Source: FRAMES

The Smoke Emissions Reference Application (SERA) database is a compilation of field and laboratory emission factors of wildland fire across the United States and Canada. The SERA database facilitates the analysis and summary of existing emission factors for emissions inventories…
Type: Tool
Source: FRAMES

Tate
e-ISuite is a software program used to manage incident resources. The e-ISuite system is a web browser (e.g. Internet Explorer) enabled application for use at the Incident Command Post (ICP) and in agency offices to manage emergency incidents and planned events. No software…
Type: Tool
Source: FRAMES

Howe, St. Clair, Bachelet, Stevenson-Molnar
The Seedlot Selection Tool (SST) is a GIS mapping program designed to help forest managers match seedlots with planting sites based on climatic information. The climates of the planting sites can be chosen to represent current climates, or future climates based on selected…
Year: 2019
Type: Tool
Source: FRAMES

Fire Dynamics Simulator (FDS) is a large-eddy simulation (LES) code for low-speed flows, with an emphasis on smoke and heat transport from fires. Smokeview (SMV) is a visualization program used to display the output of FDS and CFAST simulations.
Year: 2015
Type: Tool
Source: FRAMES

Perrakis
This tool allows users to look at fire behavior characteristics (rate of spread and fireline intensity) for multiple fuel types on the same graph. Other factors, including Initial Spread Index, Buildup Index, and Foliar Moisture Content can be adjusted as well. This chart was…
Type: Tool
Source: FRAMES

Andrews, Heinsch, Bevins, Tirmenstein
The BehavePlus fire modeling system is a PC-based program that is a collection of models that describe fire behavior, fire effects, and the fire environment. It is a flexible system that produces tables, graphs, and simple diagrams and can be used for a multitude of fire…
Type: Tool
Source: FRAMES

Freeman, Frescino
Creates sophisticated models of training data and validates the models with an independent test set, cross validation, or Out Of Bag (OOB) predictions on the training data. Create graphs and tables of the model validation results. Applies these models to GIS .img files of…
Year: 2023
Type: Tool
Source: FRAMES

Scott
This tool allows users to look at fire behavior characteristics (such as rate of spread, fireline intensity, flame length, heat per unit area, and wind adjustment factor) for multiple fuel types on the same graph. Other factors such as moisture content, understory vegetation…
Type: Tool
Source: FRAMES

The Fire Emission Production Simulator (FEPS) manages data concerning consumption, emissions and heat release characteristics of prescribed burns and wildland fires. FEPS can be used for most forest, shrub and grassland types in North America and the world. The program allows…
Type: Tool
Source: FRAMES